Material Handling Equipment

In case of extremely heavy objects instead of the belts, there are conveyor chains that connect the object to its rear end. Apart from this, the conveyor chain is also one of the fixtures on the conveyor system that is used in the mechanical functioning of the system. Like the conveyor rollers, the chain plays a major role in the mechanical functioning of the conveyor belt. Usually the conveyor control is directly linked or attached to the chain, and it is the speed of the chain that will determine how fast the entire process will finish. The conveyor chain is generally fabricated from metal. It is available in various qualities, shapes and sizes to suit various needs and requirements. In case the conveyor chain gets damaged at any given point, then it can be replaced. Ideally, the conveyor chain should be changed or serviced on a periodic basis, because any damage to the chain slows down the functioning of the conveyor.

Belt conveyors are widely used to carry load of bulk material along horizontal or inclined paths. They also carry light weight material from one spot of operation to another. They can be called the most commonly used conveying equipments. We manufacture various types of belt conveyors such as stationary portable and mobile conveyors that are capable of carrying high load to high extent of inclinations. The belt conveyor that we offer is equipped with AEC 100 Friction Driven Belt Bends which ensures positive transfer of various products from various packages to bins. It has the capacity to carry load up to 50kg at speed that ranges from 5m/min to 60m/min without changing the position of the product. Listed below are some of its specific features: • Sturdy solid framework • Standard range of modules (can be customized on the clients request) • High density conical end rollers • 2Ply Non mono belting • Vulcanized belt joints • Positive belt guiding system • produce Low noise • facilitates Belt change within 30 minutes Some of the many advantages of the belt driven conveyors are as follows: • Comes with roller to make location and mobility easy. • Provided with a friction belt under the roller, which gives a conveying surface and reduce the chances of off tracking and damage to the belt that can happen due to direct contact. • Pressure rollers can be adjusted to reduce pressure. • Belt speed is from 30 to 100 FPM. • Travel direction can be reversed in units up to 100 feet in length and has a center drive. • Centers are 2.4", 3", 4" and 6", multiples may be provided according to specifications. • Standard frame widths are 12", 15", 18", 21", 24", 30" 36", 42" and 48". (Dimensions are given on the outside of the frame.) • The spring loaded rollers are 1.9" in diameter by 16 ga. with 7/16" hex axles, on required centers. • Accumulation beds are available.

We offer a variety of screw conveyors like twin screw, screw feeders, paddle and mixing conveyors, right and left screw conveyors and rotary air lock valves etc. the screw conveyors that we offer come in simple designs and are easy to maintain. The width is small and allows the vent of the material at some points. It is of importance when extremely dusty, hot and pungent smelling materials are in use. It can be made dust free by covering up the trough.